FD422 / FD432 / FD622


FD422 / FD432 / FD622 

  FD422 / FD432 / FD622


 

   - پشتیبانی از پروتکل  CANopen
   - ولتاژ منبع تغذیه AC220V -20/+15% 47-63Hz
   - ولتاژ منبع تغذیه مدل FD622 : سه فاز AC380V -20/+15% 47-63Hz
   - توان نامی خروجی (کیلو وات) : 0.2-2.3KW

 

قبلی:ندارد
بعدی:ندارد

Model parameter FD422-□A-000 FD432-□A-000 FD622-□A-000
Power Main supply voltage Single-phase AC220V -20/+15% 47~63Hz Single-phase or 3-phase AC220V -20/+15% 47~63Hz 3-phase AC380V -20/+15% 47~63Hz 
Control circuit voltage 18VDC~30VDC 1A 18VDC~30VDC 1A 18VDC~30VDC 1A
Current Rated current(RMS) 4A 10A 7A
Peak current(PEAK) 15A 27.5A 25A
Feedback signal 2500PPR (incremental encoder with 5V supply)
Brake chopper Use an external braking resistor according to application, mainly in occasion of quick stop.
Brake chopper threshold DC380V±5V DC380V±5V DC680V±5V
Over-voltage alarming threshold DC400V±5V DC400V±5V DC700V±5V
Under-voltage alarming threshold DC200V±5V DC200V±5V DC400V±5V
Cooling method Natural air cooling Fan Fan
Weight(Kg) 1.2 2.4 2.4
General Functions Digital input specification 7 digital inputs, with COMI terminal for PNP (high level valid 12.5-30V) or NPN (low level valid) connection.
Digital input function Define freely according to requirement, supporting following functions: Driver enable,driver fault reset,driver mode control, proportional control, positive limit, negetive limit, homing signal,reverse command, internal speed section control, internal positive section control, quick stop, start homing, active command, switch electronic gear ratio, switch gain
Digital output specification 5 digital outputs,OUT1 - OUT4 current is 100mA, BR+/BR- (Brake control ourtput ) current is 500mA, can drive brake device directly
Digital output function Define freely according to requirement, supporting following functions: Driver ready, driver fault, position reached, motor at zero speed, motor brake, motor speed reached, Z signal, maximum speed obtained in torque mode, motor brake, position limiting, reference found, multi-position reached
Analog input 2 analog input, can be used to control speed and torque, the input range is -10V - 10V.
Encoder signal output function Output encoder signal is optional, can be used in the multiple axises synchronization, the max. output frequency is 2MHz.
RS232 The max. baudrate is 115.2KHz, use JD-PC software to communicate with PC, or via free protocol to communicate with controller.
Protection functions Over-voltage protection,under-voltage protection,motor over-heat protection(I²T),short-circuit protection,drive over-heat protection,etc.
RS485 The max. baudrate is 115.2KHz, use Modbus RTU protocol to communicate with controller.
CAN BUS The max. baudrate is 1MHz, use CANopen protocol to communicate with controller.
Operation
Environment
Operating temperature 0 - 40℃
Storage temperature -10℃ - 70℃
Humidity(non-condensing) Below 90%RH
Protection class IP20
Installation environment Installed in a dust-free,dry and lockable environment(such as in a electrical cabinet)
Installation mode Vertical installation
Height No power limitation below 1000m
Atmospheric pressure 86kpa~106kpa
  Note: □=L: Communication port RS232, RS485
                 □=A/C: Communication port RS232, CANopen
 

 

 

Kinco Servo Drive CD422 dimension

Kinco Servo Drive CD422 dimension 2

قبلی:ندارد
بعدی:ندارد

File name File type Format Datetime Downloads
Russian Kinco CD/CD2 Series Servo Catalog Product catalog zip 2013-11-01
Kinco Products Catalog Product catalog zip 2012-08-03
CD/CD2 Servo Catalog Product catalog zip 2012-06-25
3D model for Kinco SMH80 series motor 3D model rar 2012-02-06
ED Servo Catalog Product catalog zip 2011-05-19
قبلی:ندارد
بعدی:ندارد

File name File type Format Datetime Downloads
قبلی:ندارد
بعدی:ندارد

 

JoomShaper